How To Enable And Disable The Electrifier - Nice Infinity Shock G2 Instrucciones Y Advertencias Para La Instalación Y El Uso

HOW TO ENABLE AND DISABLE THE
8
ELECTRIFIER
This electrifier has three forms of enabling or disabling. Every time it is
enabled, it generates a beep on the siren and when disabled, it generates
two beeps on the siren.
NOTE: If after disabling it generates another long beep, that means
there was a violation on the electric fence or the alarm zone, in this case
the shock Led or the fence Led remains flashing even if the disabled
electrifier informs what was violated. To end the violation alarm, cycle the
enable/disable.
- TC Input, this input is designed for use an external access keyboard
or an activation key (Pacri Key) with a retention-type input. Whenever the
keyboard input (TC) is used, the central will enable or disable the alarm
zone and the shock simultaneously.
- Magnetic key, the electrifier comes with a magnetic key, which when
introduced to the front cover orifice will lead the electrifier to enable or
disable the alarm zone and the shock simultaneously.
- Remote Control, the electrifier has the capacity to store up to 30
wireless devices in its memory, each button on the remote control is
considered 1 device. The control should transmit the Code Learning
standard (HT6P20B), on the 433.92Mhz frequency. Always use Genno
remote controls to prevent damage to the central and to prevent
incompatibility.
Remote control setting is made button by button and will have the
exclusive function of enabling the fence and the alarm zone. See below
how to set it. After programming the remote-control button, just press the
button set to enable/disable.
49
ENGLISH_