Midtronics PowerSensor MICRO740 Manual De Instrucciones página 23

• Direct sunlight interferes with infrared data transmission/
receiving. If the printer is not receiving data, remove the printer
and Micro740 from direct sunlight. If the printed characters are
not clear or are partially missing, recharge the battery and
reprint.
• Verify that the correct printer is selected. Press and hold the
MENU button, use the arrow buttons to scroll to SELECT
PRINTER, and press ENTER. Use the arrow buttons to scroll to
IRDA PRINTER or HP82240B, and press ENTER. Verify that a
compatible communications protocol is selected in the printer
setup (see "Setting up the Printer").
• If you are unable to print after ensuring the analyzer is
functioning, the printer is on, the battery is good, and the IR
transmitter and receiver are aligned, check the printer manual for
further instructions or call Midtronics at 1-800-776-1995 for
assistance.
- 21 -