Options Menu; View Results; Select Printer; Print Results - Midtronics PowerSensor MICRO740 Manual De Instrucciones

OPTIONS MENU

Select the following options by pressing and holding the MENU
button. Use the ARROW buttons to scroll to an option, and press
ENTER to select.

VIEW RESULTS

IMPORTANT: The last test results will be lost when you start a
new test.
You can view the last test results, including individual results for the
last series of batteries tested or results for the last SOC pack test
(with generated battery/SOC codes).
If the last test was a battery test, the analyzer will display for each
battery tested the selected rating system, the result (Table 2) with the
measured voltage and CCA if applicable, and the Battery Code if
generated. The results are displayed in multiple screens; press
ENTER to move to each screen.

SELECT PRINTER

The Micro740 can output 2 different types of communications proto-
cols: HP82240B and IrDA. The standard accessory is the IrDA
printer, which is the default in the Options menu and in the printer's
software setup. If you change protocols in the Options menu, be
sure to select the same protocol in the printer's setup.
Refer to "Printer Setup" for more information.

PRINT RESULTS

IMPORTANT: The last test results will be lost when you start a
new test.
Note: If you will be using the printer for the first time, charge its
battery for 16 hours before beginning your test session. Refer to the
printer manual for more information.
The Micro740 can print the last test results, including individual
results for the last series of batteries tested or the results for the last
SOC Pack Test. The generated battery/SOC codes are included
(Figure 4).
- 10 -