Voltmeter; Important; Date & Time; Export Data - Midtronics PowerSensor MICRO740 Manual De Instrucciones

VOLTMETER

The Micro740 can also function as a voltmeter. The operating range
of the voltmeter is 0 to 30 Vdc.
IMPORTANT: If the Micro740 is connected above 30 Vdc, the circuit
board may be damaged.
DATE & TIME
To verify the date and time, disconnect the clamps and press and
hold MENU. Use the ARROW buttons to scroll to DATE & TIME and
press ENTER.
To change the hour, use the ARROW buttons to scroll to the correct
number, and press ENTER to accept it and move to the minutes
segment. When finished, press ENTER.
The date is factory-set and cannot be changed. To have the date
changed, see the "Patents, Limited Warranty, Service" section for
information on returning the analyzer to Midtronics.

EXPORT DATA

This feature is not currently used.

UPGRADE

This feature activates the optional upgrade that enables the
Micro740 to perform a starting/charging system test. Contact
Midtronics Customer Service at 1-800-776-1995 for information on
upgrading your analyzer.
The following section contains instructions on how to use the
upgraded testing capabilities.
- 12 -