Table 2. Battery Test Results; Replace Battery; Battery Code; Testing More Than One Battery - Midtronics PowerSensor MICRO740 Manual De Instrucciones

Table 2. Battery test results

Result
GOOD BATTERY
GOOD-RECHARGE
CHARGE & RETEST

REPLACE BATTERY

BAD CELL-REPLACE

BATTERY CODE

After a REPLACE or BAD CELL-REPLACE result, the analyzer will
prompt you to press ENTER to generate a battery code.
When the prompt BAT.SERIAL # appears, enter the battery's serial
number. Use the ARROW buttons to scroll to the correct digit, then
press ENTER to select it and move to the next digit. (Pressing the
BACK button will move the cursor back one space.) When finished,
press ENTER.

TESTING MORE THAN ONE BATTERY

If you have selected more than one battery for testing, the analyzer
will prompt you to connect to the next battery. After connecting, press
ENTER. The analyzer will immediately begin testing and display the
results in Table 2.
Recommendation
Return to service.
The battery is good, but has an
insufficient state of charge. Fully charge
the battery and return to service.
The battery has a very low state of
charge. Fully charge battery and retest.
Failure to fully charge the battery
before retesting may cause false
readings.
Replace the battery and generate a test
code (see "Battery Code").
Replace the battery and generate a test
code (see "Battery Code").
- 8 -