Tabla de contenido
CP 50
I.7
MAINTENANCE REGULATIONS
I.7.1
To preserve the aesthetic look
Minimum cleaning frequency:
In rural atmospheres and provided that the aluminium constructions are exposed to the rain: twice a
year. In all other cases: 4 times a year.
The aluminium should be cleaned with tepid water with a non-aggressive (pH-neutral), non-acetous
detergent, not containing ammonia. We recommend Reynawash (art.no. 086.9185.--). An annual
treatment with Reynaclean (art.no. 086.9201.--) puts a protective film on the profiles, thanks to which
colour and gloss are better preserved. In certain exceptional cases, such as scratches or pollution, the
Heavy Duty Cleaner (art.no. 086.9179.--) can be applied, followed by Reynaclean. Specifically for
anodized aluminium, the Eloxal Cleaner (art.no. 086.9392.--) can be applied, for example in case of
stains and pollution, also followed by Reynaclean.
I.7.2
To guarantee good function of mechanical parts
Clean the chamber between the moving and the fixed part every 6 months and, if necessary, clear the
drainage slots of any blockages. Carefully clean the rollers of sliding elements and, if necessary, clear
the drainage slots of any blockages.
Minimally apply normal domestic talc to the gaskets (in EPDM) between the moving and the fixed part
of the construction, or apply liquid silicone (by means of a cloth), to avoid cracks and deposits.
Remove the dust, and grease, annually from the following areas:
- window gearing;
- friction hinges;
- the moving parts of the handles.
Remove the dust, and graphite, annually from the following areas:
a) locks and cylinders, using a graphite pipette in powder form;
b) the opening restrictor of the sliding construction.
N.B. These pieces may not be greased or oiled.
03/2003
Información general sistema
Généralités séries
General information systems
Allgemeine Information Systeme
PRESCRIPCIONES DE TRATAMIENTO
RECOMMANDATIONS DE TRAITEMENT
PROCESSING DATA
VERARBEITUNGSVORSCHRIFTEN
37.B.055
Tabla de contenido
