Tabla de contenido
Idiomas disponibles
Idiomas disponibles
:
Set the choke lever (4):
For cold start to g
For warm start to e
(also use this setting if the engine
has been running but is still cold)
HL 75, HL 75 K
5
:
Press the fuel pump bulb (5) at least
five times even if bulb is already
filled with fuel.
English / USA
:
Place the unit on the ground: It must
rest securely on the engine support
and the gearbox.
:
Remove the blade scabbard.
:
Check that the cutting tool is not
touching the ground or any other
obstacles. lf necessary, rest the
gearbox on a raised support (e.g.
mound, brick or something similar).
:
Make sure you have a firm footing.
:
Hold the unit with your left hand and
press it down firmly – your thumb
should be under the fan housing.
Do not stand or kneel on the drive
tube since it will otherwise be
permanently bent and damaged.
19
Capítulos
Tabla de contenido
