Light Kit Led Array Assembly Replacement; Tools Needed - Luminance Brands Kathy Ireland Home VOLTA CF590RBQ00 Manual De Instrucciones

12. Light Kit LED Array Assembly Replacement

WARNING
!
To avoid possible electrical shock, be sure electricity
is turned off at the main fuse box before wiring.
NOTE: If you are not sure if the outlet box is grounded,
contact a licensed electrician for advice, as it must be
grounded for safe operation.

Tools Needed

One Phillips Head Screwdriver
One Stepladder
12.2
Rotate and remove the Shade counter-clockwise to
expose the Light Kit Assembly (Figure 41).
Retain Shade for future reinstallation.
12.3
Loosened the two Light Kit Adapter 6-32 x 3/8" Truss
Head Screws with Lockwashers located in the key hole
slots.
Remove the remaining Light Kit Adapter 6-32 x 3/8"
Truss Head Screws with Lockwasher (Figure 42).
Retain for future use.
Rotate the Light Kit Assembly counter-clockwise to
disengage the two 6-32 x 3/8" Truss Head Screws with
Lockwashers in the key hole slots for removal of Light
Kit Assembly.
!
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box before wiring. All wiring
must be in accordance with National and Local codes
and the ceiling fan must be properly grounded as a
precaution against possible electrical shock.
12.1
Disconnect electrical power to the branch circuit at the
circuit breaker or fuse box before attempting to replace
the Light Kit LED Array Assembly.
ROTATE
COUNTER-CLOCKWISE
Figure 41
ROTATE
COUNTER-CLOCKWISE
REMOVE ONE 6-32 x 3/8" TRUSS
SCREW WITH LOCKWASHER
Figure 42
22
WARNING
LIGHT KIT
ADAPTER/LIGHT
KIT ASSEMBLY
SHADE
LOOSEN TWO 6-32 x 3/8"
TRUSS HEAD SCREWS
WITH LOCKWASHERS
LIGHT KIT ASSEMBLY
ETL Model No.: CF590