Luminance Brands Kathy Ireland Home VOLTA CF590RBQ00 Manual De Instrucciones página 6

3. Ceiling Fan Assembly
3.4
Carefully turn the partially assembled Ceiling Fan
right side up and position the Fan on the styrofoam in
preparation for final assembly (Figure 4).
3.5
Remove the Hanger Ball by loosening the Phillips Head
Set Screw in the Hanger Ball until the Ball falls freely
down the 4.5" Downrod (Figure 5).
Remove the Pin from the 4.5" Downrod, then remove
the Hanger Ball (Figure 5).
Retain the Pin and Hanger Ball for reinstallation in
Step 3.11.
3.6
Separate, untwist and unkink the three 80" Motor Wires.
Route the three Motor Wires through the 4.5" Downrod
(Figure 6).
(Continued)
Figure 4
PIN
PHILLIPS HEAD SET SCREW
(LOOSENED)
Figure 5
THREE 80" MOTOR WIRES
Figure 6
6
PARTIALLY ASSEMBLED
CEILING FAN
STYROFOAM
GREEN GROUND WIRE
4.5" DOWNROD
HANGER BALL
4.5" DOWNROD
ETL Model No.: CF590