6.3
Engage the Fan Motor 2-Pin Wire Connector into
the 2-pin Wire Connector of the LED Light Fixture
Assembly (Figure 28) .
The connection is complete when you hear a soft click .
6.4
Carefully tuck all the Wires and Connectors into the
Light Fixture Adapter .
Position the LED Light Fixture Assembly onto the Light
Fixture Adapter, aligning the Three Screw Holes . The
Three LED Light Fixture Assembly Notches should be
positioned around the Three Screw Threads, as shown
in Figure 29 .
NOTE: Verify that the wires and connectors are not
trapped between the LED light fixture assembly and
the light fixture adapter.
Install and tighten the Three #6-32 x 1/4" Pan Head
Screws with Lockwashers (supplied) to complete
the installation of the LED Light Fixture Assembly
(Figure 29) .
A spare #6-32 x 1/4" Truss Head Screw with
Lockwasher is supplied in parts bag, if needed .
WARNING
!
To avoid possible fire or shock, do not pinch wires
between the light fixture adapter and the LED light fixture
assembly.
FAN MOTOR ASSEMBLY
CONNECTOR
LED LIGHT FIXTURE
ASSEMBLY CONNECTOR
FAN MOTOR
CONNECTOR
Figure 28
INSTALL THREE #6-32 x 1/4" PAN HEAD
SCREWS WITH LOCKWASHERS
Figure 29
18
LED LIGHT
CONNECTOR
LIGHT FIXTURE ADAPTER
ETL Model No.: CF444