Ceiling Fan Assembly - Luminance Brands Kathy Ireland Home EUCLID CF500AP00 El Manual Del Propietario

3.1
NOTE: Intermixing blades and flanges between
fans can cause excessive wobble. Keep blades and
flanges in original sets of five.
Place the Fan Blade on the Fan Blade Flange
(Figure 1) .
Tighten the #10-24 x 9/32" Washer Head Screw
(supplied in parts bag) to secure the Fan Blade and Fan
Blade Flange (Figure 1) .
Repeat this procedure for the other Four Fan Blade
Flanges and Fan Blades .
Make sure all the #10-24 x 9/32" Washer Head Screws
are tighten securely to the Fan Blade and Flange .
3.2
Loosely attach One Blade/Flange Assembly to the
Motor Hub by securing the Two 1/4-20 x 9/16" Round
Head Screws with Lockwashers (Figure 2) .
Repeat this procedure for the other Four Blade/Flange
Assemblies .
Securely tighten all the 1/4-20 x 9/16" Round Head
Screws with Lockwashers to the Motor Hub at this time .
NOTE: Take care not to scratch fan housing when
installing blades.
A spare 1/4-20 x 9/16" Round Head Screw with
Lockwasher supplied in parts bag, if needed .
WARNING
!
To reduce the risk of personal injury, do not bend
the blade flange when installing the blade flanges,
balancing the blades or cleaning the fan. Do not insert
foreign objects in between rotating fan blades.

3. Ceiling Fan Assembly

#10-24 x 9/32" WASHER
HEAD SCREW
FAN
BLADE
Figure 1
BLADE/ FLANGE ASSEMBLY
Figure 2
5
FAN BLADE FLANGE
1/4-20 x 9/16" ROUND
HEAD SCREWS WITH
LOCKWASHERS
(2 per blade / flange
MOTOR HUB
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: CF500