Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SETTINGS
Audio Video Settings
TV Aspect Ratio
You can set the screen aspect ratio of the connected
TV, and adjust the video output.
If you switch your TV (i.e. because you have bought a
new one) and the screen aspect ratio of the connected
TV changes, you will have to change the "TV Aspect
Ratio" setting.
Item
Wide 16:9: Select this when connecting to a TV with a
16:9 screen aspect ratio.
Normal 4:3: Select this when connecting to a TV with a
4:3 screen aspect ratio.
<When selecting Normal 4:3>
Item
Letter Box: If you connect to a TV with a screen aspect
ratio of 4:3 and playback a DVD with 16:9 video, the
video will be played back with black bands at the top
and bottom while maintaining the 16:9 ratio.
Pan Scan: If you connect to a TV with a screen aspect
ratio of 4:3 and playback a DVD with 16:9 video, the
video will be played back with the left and right sides of
the image cut off to display in 4:3 screen aspect ratio.
(This function works if the disc is labelled for 4:3PS.)
Component Video Out
This sets the resolution of the component video
output.
Some TV are not fully compatible with the Blu-ray disc
player, which may cause the image distortion. In this
case, press VIDEO OUTPUT RESET on the remote
control for five seconds. "Component Video Out" will
be reset to "480i" (factory preset value).
Item
1080i, 720p, 480p, 480i
HDMI Video Out
This sets the resolution of the HDMI video output.
Some TV are not fully compatible with the Blu-ray disc
player, which may cause the image distortion. In this
case, press VIDEO OUTPUT RESET on the remote
control for five seconds. "HDMI Video Out" will be reset
to "Auto" (factory preset value).
Item
Auto, 1080p, 1080i, 720p, 480p
NOTE
•
When the BD player is connected to a 1080p 24 Hz
compatible TV and the "HDMI Video Out" is set to "Auto",
1080p 24 Hz will automatically be displayed when
compatible discs are played back.
At 1080p 24 Hz/1080p 60 Hz, there is no output from the
COMPONENT VIDEO output jacks and VIDEO output jack.
Video Out Select
This function allows you to select the priority video
output when you connect video equipment such
as a TV to both the HDMI OUT terminal and the
COMPONENT VIDEO output jacks.
Item
HDMI, Component
•
When the priority video output is selected, video is output
from the other video terminal with the resolution of the
selected video output.
•
There is no output from the COMPONENT VIDEO output
jacks and VIDEO output jack when video is output at
1080p resolution and the priority video output is selected
to "HDMI".
•
If the video equipment connected to each of the terminals
is not compatible with the resolution of the priority video
output, abnormalities in images on the screen may appear.
Secondary Audio
This toggles the clicking sound on the menu and audio
with secondary video in picture in picture mode for
BD-Video.
•
Select "Off" when enjoying the high quality sounds of BD-
Video.
Item
On, Off
37
Capítulos
Tabla de contenido
Solución de problemas
