Trolley Operator - Wayne Dalton 8000 Manual Del Usuario

D
NOTE: See Trolley Operator Manual for complete
Tools Needed:
installation instructions.
Tape Measure
WARNING
OPERATOR MUST BE TESTED AT TIME OF
INSTALLATION AND MONTHLY THEREAFTER AS
DESCRIBED IN YOUR INSTALLATION INSTRUCTIONS
AND OWNER'S MANUAL, TO ENSURE THAT DOOR
SAFETY FEATURES FUNCTION. FAILURE TO TEST OR
MAKE ANY NECESSARY ADJUSTMENTS OR REPAIRS,
CAN RESULT IN SEVERE OR FATAL INJURY.
1. Install operator rail 1/2" to 1-1/2" (13 - 38 mm)
above high arc of top section of the door.
2. Mount operator to ceiling so that 1" to 1-1/2"
(25 - 38 mm) clearance is maintained between
trolley rail and top section when door is fully
open (trolley rail will slope down towards rear).
3. Attach door arm to operator bracket.
4. Attach operator rail to suitable mounting
surface (2" x 6") lumber min.
5. Attach operator to ceiling using perforated
angles as shown.
IMPORTANT: PERFORATED ANGLE MUST BE
ATTACHED TO FRAMING MEMBER(S).
28
Please Do Not Return This Product To The Store. Contact your local Wayne Dalton dealer. To find your local Wayne Dalton dealer, refer to your local
yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com.

Trolley Operator

Suitable mounting
surface (2" x 6")
lumber min.
Header
Operator rail
Operator rail
Door arm to operator
bracket
Perforated angle
Operator
Framing
members
Perforated angle brace