Technical Data; Noise Information - Bosch PTS 10 Manual Original

OBJ_BUCH-783-008.book Page 30 Monday, May 15, 2017 2:42 PM
30 | English
14 ON button
15 OFF button
16 Angle stop
17 Ring spanner (23 mm; 13 mm)
18 Auxiliary stop of the angle stop 16
19 Fastening screw of saw-blade storage
20 Mounting holes
21 Guide groove for angle stop
22 Push stick
23 Fastening knob for table extension 2
24 Locking lever of the sliding table
25 Fastening knob for parallel fence 9
26 Fastening knob for table width enlargement 10
27 Storage for auxiliary stop 18
28 Storage for parallel guide 8
29 Locking knob for adjustment of bevel angles
30 Cable holder
31 Chip ejector
32 Storage for angle stop
33 Vacuum hose
34 Bottom plate
35 Hexagon bolt for fastening of the riving knife 4
36 Insert-plate notches
37 Saw blade
38 Fixture for riving knife
39 Fastening kit for "table extension"
40 Rubber buffer
41 Guide rail of the angle stop
42 Locking knob on the angle guide
43 Fastening kit "for auxiliary stop/angle stop"
44 Clamping handle of the parallel guide
45 Guide groove for parallel guide 8
46 Clamping lever of auxiliary stop 7
47 Spindle lock lever
48 Clamping nut
49 Clamping flange
50 Mounting flange
51 Tool spindle
52 Locking knob for bevel angle (horizontal)
53 Angle indicator on the angle guide
54 Handwheel
55 Indicator for bevel angle
56 Scale for bevel angle
57 Lens
58 Scale for clearance of the saw blade to the parallel fence
9
59 Adjusting screw for setting the standard 90° bevel angle
60 Adjusting screw for setting the standard 45° bevel angle
61 Screw for bevel angle indicator
62 Nut for adjustment of the parallel-fence 8 tensioning
force
1 609 92A 3VE | (15.5.17)
63 Adjusting screws for sliding-table play
64 Adjusting screws for insert plate
65 Recessed handles
66 Fastening kit for "base unit"*
67 Base unit*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Table saw
Article number 3 603 M03 ...
Rated power input
No-load speed
Reduced starting current
Weight according to EPTA-
Procedure 01:2014
Protection class
Dimensions (incl. removable product features)
Width x depth x height
Maximum workpiece dimensions, see page 34.
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Dimension of suitable saw blades
Saw blade diameter
Blade body thickness
Tooth thickness/setting, min.
Mounting hole diameter

Noise Information

Sound emission values determined according to
EN 61029-2-1.
Typically the A-weighted noise levels of the product are:
Sound pressure level 91 dB(A); Sound power level
104 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
The noise emission value given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It may also
be used for a preliminary estimation of noise emissions.
The noise emission value given represents the main applica-
tions of the power tool. However, if the power tool is used for
other applications, with different accessories or is poorly
maintained, the noise emission value may differ. This may sig-
nificantly increase noise emissions over the total working pe-
riod.
To estimate noise emissions accurately, the times when the
tool is switched off, or when it is running but not actually being
used, should also be taken into account. This may significant-
ly reduce noise emissions over the total working period.
PTS 10
PTS 10 T
PTS 100 T
... 4..
W 1400
-1
min 5000

kg 26.0
/II
mm 620 x 770 x 450
mm 254
mm 1.8
mm 2.5
mm 30
Bosch Power Tools