Tabla de contenido
Idiomas disponibles
Idiomas disponibles
G B
M T
Sound power level
measured ............. 84 dB(A);
guaranteed ........................... 87 dB(A)
Vibration(a
) ...... 2,39 m/s
h
* After continuous operation of 15 minutes the
drill stops until the device temperature devi-
ates by less than 2 K (2°C) from the room
temperature.
Levels of noise and vibration were determi-
ned according to the norms and regulati-
ons in the declaration of conformity.
The vibration emission value has been
measured according to a standardised
testing method and may be used for com-
parison with another electric tool.
The indicated vibration emission value may
also be used for an introductory assess-
ment of the exposure.
Warning:
The vibration emission value whilst
actually using the electrical tool
may vary from the given values in-
dependently of the type and way in
which the electric tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
5 8
(L
)
WA
K
= 3 dB
WA
;
K= 1,5 m/s
2
Notes on safety
Caution! When using power tools,
observe the following basic safety
2
measures for the prevention of
electric shocks and the risk of injury
Please read all these instructions
before using this electric tool and
please keep the safety instructions.
Symbols and icons
Symbols on the device:
Warning!
Warning! Electric shock hazard.
Always unplug the device before
working on it.
Read the manual!
Wear ear protection
Wear eye protection
Do not wear long hair uncovered.
Use a hair net.
Do not wear gloves.
Caution! Risk of injury from rotating
parts!
Caution! Hot surface. There is a
risk of burns.
Electrical machines do not belong
with domestic waste
Capítulos
Tabla de contenido
