Select Direction Of Rotation; Preselecting The Rotation Speed; Switching On And Off; Maintenance And Cleaning - Parkside PSBM 750 B2 Traducción Del Manual De Instrucciones Original

Select direction of rotation

WARNING!
► The rotation direction switch
be used/adjusted if the appliance is at a
standstill.
♦ Select the direction of rotation by pressing the
rotation direction switch
right.

Preselecting the rotation speed

You can use the rotational speed preselector
adjusting wheel
speed. The speed you select depends on the
material to be processed. Work out the right
setting by carrying out a practice test.:
NOTE
► The appliance only reaches the set rotational
speed during continuous operation.
Switching on and off
Switching the appliance on:
♦ Press the ON/OFF switch
Switching the appliance off:
♦ Release the ON/OFF switch
Switching to continuous operation:
♦ Press the ON/OFF switch
pressed position with the ON/OFF switch lock
button .
Switching off continuous operation:
♦ Press the ON/OFF switch
again.
PSBM 750 B2
may only
towards the left or
to preselect the rotational
.
.
. Lock it in the
and release it

Maintenance and cleaning

WARNING! RISK OF INJURY!
Switch the appliance off and re-
move the power plug before start-
ing any work on the appliance.
■ Never permit liquids to penetrate inside the
appliance.
■ Use a soft, dry cloth to clean the housing.
Never use petrol, solvents or cleansers which
can damage plastic.
■ Always clean the appliance after completion
of work.
■ Store the appliance in a dry place.
WARNING!
► If the connecting cord needs to be replaced,
this must be carried out by the manufacturer
or an authorised representative in order to
avoid safety hazards.
NOTE
► Replacement parts not listed (such as carbon
brushes, switches) can be ordered via our
service hotline.
GB │ MT │
37 ■