Tabla de contenido
Idiomas disponibles
Idiomas disponibles
GB
PART DESCRIPTION (Fig. 15)
1)
Terminal board for 230 V connections (line, transformer primary and flashing light)
2)
Power supply fuse T5A 24V
3)
Line fuse T2A 230V
4)
Terminal board for motor, 24V and transformer secondary (22V) connections
5)
Terminal board for electric lock 12V 15W
6)
Encoder connector
7)
Connector for OC optional radio card.
8)
Radio channel 1 programming button
9)
Radio channel 1 LED
10)
Radio channel 2 LED
11)
Radio channel 2 programming button
12)
Terminal board for second radio channel output (if available).
13)
Terminal board for input, 24V and aerial connections.
14)
S/S Step/Step button
15)
STEP/STEP input state signalling LED. LED off = input open.
16)
PROG pushbutton for Programming and Stop*
17)
Control unit reset. Shorting the 2 pins momentarily has the same effect as switching power off then on
again.
18)
PHOTOCELL input state signalling LED. LED on = input closed
19)
Function dip-switches
20)
STOP input state signalling LED. LED on = input closed
21)
Programming LED (LD1)
22)
Trimmer for controlling motor speed.
(*) This STOP button must never be considered a safety device, but exclusively a service function to facilitate
tests during installation.
FIG.15
29
Tabla de contenido
