Grip Heater Switch - Suzuki 57100-05881 Instrucciones Para El Montaje

6/15
11.Fix the grip heater lead wire by
using the handle switch lead
wire and the clamp.
NOTE: Cut off the excess clamp.
Installation of Left Grip Heater
1. Loosen the screw and remove
the left side end cap.
NOTE: Try not to loosen the screw
2. Open the gap between the grip
and the handle with a - driver,
then inject degreasing agent to
pull out the grip.
Use the - screwdriver with
care so as not to scratch the
surface of the handlebar.
NOTE: Removed left side grip will
GENUINE SUZUKI ACCESSORIES
excessively. If it is loos-
ened excessively, the left
side end cap may be bro-
ken and fallen down into
the handlebar.
NOTICE
not be reused.
Grip heater
lead wire
Clamp
Left side grip
Screw
Left side end cap
Driver
Left side grip
Degreasing agent
Handle switch
lead wire