Clamp; Grip Heater Lead Wire - Suzuki 57100-05881 Instrucciones Para El Montaje

8. Reinstall the existing right side
end cap that was removed step 1.
WARNING
Check for smooth opening
and closing operations of the
throttle. See if there is any
catch in the throttle operation.
9. Pass the grip heater lead wire
between the switch box and the
front brake master cylinder
holder. Align the white tape part
of the grip heater lead wire with
the contact surface of the front
brake master cylinder holder,
and fix them by using a clamp.
CAUTION
Fix the grip heater lead wire
securely by using a clamp so
that no tension should be felt
in the throttle grip lead wire
when operating the throttle.
NOTE: Cut off the excess clamp.
10.Pass the grip heater lead wire
into the cable guide from the
bottom side of the handlebar
along the handle switch lead
wire.

Grip heater lead wire

GENUINE SUZUKI ACCESSORIES
5/15

Clamp

Grip heater
lead wire
Guide Guide