Suzuki 57100-05881 Instrucciones Para El Montaje página 9

NOTICE
• When the grip is inserted,
do not stop in midway but
insert it at a stroke.
• When inserting it, do not hit
the grip end with a hammer
or twist it forcibly, the grip
heater may be cut off.
• When the grip cannot be
inserted in midway, pull out
the grip by pouring the
degreasing agent into a gap
between the grip heater and
the handlebar. At this time,
do not twist forcibly the
heater wire with a screw-
driver or such similar tool,
the heater wire inside the
grip heater may be cut off.
WARNING
Use the designated
cement, and dry well the
applied part, then check if it is
securely adhered.
If the cement other than those
designated is used, or drying
is not enough, there would be
a risk of the grip slipping off
during the riding.
8. Reinstall the existing left side end
cap that was removed step 1.
Left side grip heater
FWD
Lead wire
grip
GENUINE SUZUKI ACCESSORIES
9/15
Handlebar
Left side grip heater