Warranty - Riester ri-focus LED Instrucciones Para El Uso

Recommended distances between portable and mobile RF communications equipment and the ri-focus LED headlights and clar N LED
The headlight is intended for use in an electromagnetic environment in which RF emissions are controlled. The customer or user of the headlights can help to avoid
electromagnetic interference by observing the minimum distance between portable and mobile RF communications equipment (transmitters) and the headlights in
accordance with the maximum output power of the communication equipment.
Rated maximum output pow-
er of the transmitter
(W)
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended distance in metres (m) can be estimated using the equation applicable to the fre-
quency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
Note 1: At 80 MHz and 800 MHz, the separation distance applies to the higher frequency range.
Note 2: These guidelines may not apply in all situations. The electromagnetic propagation is affected by absorption and reflection by structures, objects and people.
8.1 Disposal
The used medical device must be disposed of in accordance with current medical practices or local regulations on the disposal of infectious biological medical waste.
Batteries and electrical/electronic devices may not be treated as household waste and must be disposed of in accordance with local regulations.
If you have any questions about the disposal of products, please contact the manufacturer or their representative.

9. Warranty

This product was manufactured to the highest quality standards and subjected to a thorough final inspection before leaving our factory.
We are pleased to issue a warranty of 2 years from the date of purchase on all defects traceable to material or manufacturing defects. A warranty claim is excluded
from cases of improper handling or use.
All defective parts will be replaced or repaired free of charge within the warranty period.
A warranty claim can only be made if the product is accompanied by this warranty ¬card, which is filled out in full and stamped by the dealer.
Please note that warranty claims must be made within the warranty period.
We are of course happy to charge for checks or repairs after the expiry of the warranty period. We also offer free, no-obligation quotes.
In case of warranty coverage or repair, we ask you to return the RIESTER product with the completed warranty card to the following address:
Rudolf Riester GmbH
Repairs dept. RR
Bruckstr. 31
D-72471 Jungingen, Germany
Serial number or batch number:
Date, stamp and signature of the specialist dealer:
29
Separation distance according to the frequency of the transmitter (m)
150 kHz - 80 MHz
0,12
0,38
1,2
3,8
12
80 MHz - 800 MHz 800 MHz - 2,7 GHz
0,12 0,23
0,38 0,73
1,2 2,3
3,8 7,3
12 23