Required Skills/Operator Training; Environmental Conditions; Warnings/Caution - Riester ri-focus LED Instrucciones Para El Uso

1.4.5 Required skills/operator training

Only trained medical professionals should operate the examination lamps, as they have the required skills and qualifications.

1.4.6 Environmental conditions

The device is intended for use in rooms with a controlled environment.
The device must not be exposed to adverse/harsh environmental conditions.

1.5 Warnings/caution

Warning
The general warning symbol indicates a potentially dangerous situation that can lead to serious injuries.
Do not use in a magnetic resonance environment!
There is a risk of ignition of gases if the device is operated in the presence of flammable mixtures or mixtures of medicinal products and air or oxygen or nitrous
oxide! The device must not be operated in rooms in which flammable mixtures or mixtures of pharmaceuticals and air or oxygen or nitrous oxide are present, e.g.
operating rooms.
Electric shock!
The housing of the examination lights may only be opened by authorized persons.
Damage to the device due to a fall or strong ESD influence!
If the device is not functioning, it must be returned to the manufacturer for repair.
The device must be used in a controlled environment.
The device must not be exposed to harsh environmental conditions.
Caution!
The caution symbol indicates a potentially dangerous situation that can lead to minor or moderate injuries. It can also be used to warn of unsafe practices.
The faultless and safe functioning of these examination lamps can only be guaranteed if Riester original parts and accessories are used.
Old electronic devices must be disposed of in accordance with the institutional guidelines for the disposal of expired devices.
Cleaning frequency and sequence must comply with the cleaning regulations of non-sterile products in the respective facility. Cleaning/disinfection instructions in
the instructions for use must be observed.
We recommend unplugging the charger before cleaning or disinfecting.
Clean and disinfect the examination lamps carefully so that no liquid penetrates the interior.
Never place the examination lamps in liquids! The examination lamps are delivered in a non-sterile condition. Do not use ethylene, oxide gas, heat, autoclaves or any
other harsh methods to sterilize the device. The devices have not been approved for mechanical reprocessing or sterilization. This leads to irreparable damage!
The patient is not the intended operator.
The product may only be used by qualified personnel.
Qualified personnel are doctors or nurses in hospitals, medical facilities, clinics and medical practices.
19