2.1
Installation of Changeover Module in Conjunction with Cellular Telephone,
D-Network Fixed Installation or Cellular Telephone, D-Network Mobile
Phone
2.1.1 Connection Overview of Changeover Module and Adapter Lead
Note
Refer to general information and safety information provided in Section 1.
Open out fold-out page! (Page 2-27)
Item
Description
Changeover module
A
Black 2-pin pin housing
A1
Mute/terminal 30
1-pin socket contact, mute
A2
1-pin socket contact, terminal 30
A3
6 mm cable eye, terminal 31
A4
Coding loop
A5
Coding loop
A6
Black 3-pin pin housing
A7
navigation AF
Cable colour
–
White/brown
On vehicles without on-board monitor radio
Red/white
At supplied black 2-pin socket housing 1 with connected
socket contact mute PIN 4, black wire, and connected
socket contact terminal 30 PIN 9, red/green wire,
from 17-pin radio plug connector X18126
On vehicles with on-board monitor radio
At B1 black 2-pin socket housing
from adapter lead B
White/brown
On vehicles without on-board monitor radio
Plug into black 17-pin radio plug connector X18126,
PIN 4
On vehicles with on-board monitor radio
Plugged into supplied black 2-pin socket housing 1
at PIN 2
Red/white
On vehicles without on-board monitor radio
Plug into black 17-pin radio plug connector X18126,
PIN 9
On vehicles with on-board monitor radio
Plugged into supplied black 2-pin socket housing 1
at PIN 1
Brown
On LHD vehicles
At ground terminal point X173 at driver's side entrance
On RHD vehicles
At ground terminal point X173 at driver's side entrance
Blue
Not changed
White
Must be cut through if the customer requires
that the radio is not muted during a telephone
conversation
Blue/black
Tied back with cable ties on vehicle
Blue/brown
wiring harness (not required for retrofit navigation
White/brown
Mark IIi)
Connection location in vehicle
–
EN 2-7
Capítulos
