1.
Important Information
Only intended for use in the BMW dealership organisation.
The installation time required on vehicles without on-board monitor radio is
The installation time required on vehicles with on-board monitor radio is
The installation time may vary depending on the condition and equipment of the vehicle.
Target group
These installation instructions are intended for specialist personnel trained in BMW passenger cars.
Tasks:
To independently carry out all maintenance, repair, installation and readjustment jobs on passenger cars.
All jobs are to be carried out with the aid of valid BMW
– repair instructions
– circuit schematics
– maintenance manuals
– working instructions
– diagnosis manuals
in rational order with the specified tools (special tools) and in compliance with valid health and safety regulations.
Installation note
Knowledge of the vehicle electrical system is required.
Safety notes
Particular care must be taken when installing cables/lines to ensure that they are not kinked, bent or damaged.
Additionally installed cables/lines must be secured with cable ties.
Jumpers, double crimp connections or parallel connections will be required if the specified pin chambers are
occupied.
Necessary tools and aids
Set of 1/4" socket wrenches
Inspection lamp
Side cutter
Subject to technical modifications.
Set of screwdrivers for cross head screws
Set of screwdrivers for slotted head screws
Hot air blower
1.0 hours.
1.5 hours.
EN 1-3
Capítulos
