AVM FRITZ!WLAN Repeater 310 Manual Del Usuario página 4

Connecting the FRITZ!WLAN Repeater 310 with WiFi at the Touch of a Button
1. Insert the FRITZ!WLAN Repeater 310 in an outlet in the vicinity of your wireless access point (for instance,
a FRITZ!Box).
2. Press the WPS button on the FRITZ!WLAN Repeater 310 until the "WLAN" LED starts to fl ash.
3. Within two minutes, press the button on your wireless access point that initiates WPS. For more infor-
mation, see the documentation of this device.
The FRITZ!WLAN Repeater 310 adopts the SSID (radio network name) and the network key from your
wireless access point and establishes a secure wireless connection. "Power", "WLAN" and "
up.
4. Insert the FRITZ!WLAN Repeater in an outlet located about halfway between your wireless access point
and the wireless devices to be added to the wireless network.
The FRITZ!WLAN Repeater 310 is connected with your home network by wireless LAN. Check the settings and
perform an update if necessary. Continue on page 9.
6
1
" light
2 4
WPS
Power WLAN
Wireless LAN
3
7