Commissioning; Operation; Maintenance And Repair; Decommissioning - Bosch Rexroth IMmtcp Manual Del Usuario

22/76 Bosch Rexroth AG
7

Commissioning

CAUTION
Risk of damage to persons
and property!
Commissioning of the IMmtcp
interface module requires basic
mechanical and electrical
knowledge.
Only qualified personnel (see
y
"Personnel qualifications" on
page 16) are authorized to
commission the system.
• Before commissioning, check that all
plug-in connections have the correct seat.
• Once the system has been switched on
and the module has been initialized, it is
then ready for communication on the
network and waits to be connected by the
Modbus master.
• The NS LED and MS LED run through a
test sequence following system boot up.
8

Operation

Operation is not necessary while the system
is running.
IMmtcp | 3 609 929 B65/2008-09
9 Maintenance and
repair
Cleaning and care
CAUTION
Any dirt or liquids penetrating
the device lead to
malfunctions!
Safe function of the IMmtcp
interface module is no longer
ensured.
y Always provide for absolute
cleanness when working on
the IMmtcp interface module.
Maintenance
The IMmtcp interface module is
maintenance-free if used as intended.
Spare parts
The addresses for our national
representatives can be found at
www.boschrexroth.com and in the address
directory in chapter "16 Service and sales"
on page 26.
10

Decommissioning

For details about how to disassemble or
replace your IMmtcp interface module please
refer to chapter "11 Disassembly and
replacement" on page 23.