Bluetooth Usb Adapter; Microsoft Bluetooth Driver; 16 4. Initial Commissioning; 16 4.1 Esi[Tronic] 2.0 Software Installation - Bosch KTS 5 Serie Manual Original

3.7

Bluetooth USB adapter

The Bluetooth USB adapter included in the scope of
delivery provides a radio link with KTS 540 / 570. It is
plugged into the PC/laptop. Readiness for operation
is indicated by the flashing LED (see operating manual
1 689 989 277).
! It is not possible to operate any other item of Blue-
tooth hardware installed or plugged into the PC/
laptop, as this would interfere with data communica-
tion between the KTS module and the control unit.
3.8

Microsoft Bluetooth driver

!
When the Microsoft Bluetooth driver is activated,
the Bluetooth manager symbol
in "white" and the Bluetooth device symbol
"green". The Bluetooth device symbol is not dis-
played if there is no Bluetooth radio link.
Robert Bosch GmbH
Device description | KTS 530 / 540 / 570 (KTS 5 Series) | 21
4.
4.1
1. Install ESI[tronic] 2.0.
2. Licensing ESI[tronic] 2.0.
i
ESI[tronic] 2.0 licensing is performed by way of a
file or online. Information on licensing can be found
in the ESI[tronic] 2.0 Online Help.
4.2
i
In the case of a PC/laptop without internal Bluetooth
hardware, the Bluetooth driver for the Bluetooth USB
adapter is installed automatically after the Bluetooth
always appears USB adapter is plugged in. The Bluetooth USB adapt-
in er supplied is not required for a PC/laptop (e.g. DCU
220) with internal Bluetooth hardware and the Blue-
tooth driver does not have to be installed. For a PC/
laptop with Bluetooth Class 2 it is advisable to make
use of the Bluetooth-USB adapter supplied (Class 1)
as this provides a better range.
i
When starting up the Bluetooth USB adapter, the
Bluetooth hardware integrated into the PC/laptop
(e.g. Widcomm Stack/Toshiba Stack) must be deac-
tivated (see the PC/laptop operating manual). In ad-
dition, the corresponding Bluetooth driver must be
uninstalled (remove Bluetooth driver under: "Start
>> Control panel >> Software").
i
WIN XP: If the Bluetooth USB adapter is to be
connected to different PCs/laptop USB ports, the
Bluetooth driver must be installed on each USB port.
!
With Win 7 and Win 8, the Bluetooth driver can be
selected in DDC: "Settings >> Advanced settings >>
Bluetooth driver". The recommended Bluetooth driv-
er has already been pre-selected, a different Blue-
tooth driver can be selected in the event of a fault.
Initial commissioning
ESI[tronic] 2.0 software installation

Bluetooth set-up

1 689 979 987
en
|
2015-09-22