Delivery Contents; Product Description - Bosch Rexroth IMmtcp Manual Del Usuario

18/76 Bosch Rexroth AG
Persons who assemble, operate,
disassemble or maintain Rexroth products
must not consume any alcohol, drugs or
pharmaceuticals that may affect their ability
to respond.
The warranty only applies to the delivered
configuration.
The warranty will not apply if the product is
incorrectly assembled, or handled or not
used as intended.
Do not expose the product to any mechanical
loads under any circumstances. Do not place
any objects on it.
During assembly
Make sure the relevant system component is
not under pressure or voltage before
assembling the product or when connecting
and disconnecting plugs. Protect the system
against being switched on.
Lay cables and lines so that they cannot be
damaged, are in accordance with the
bending radiuses, and no one can trip over
them.
Before commissioning, make sure that all the
plug connectors are installed correctly,
undamaged, and that all screws are
tightened.
During commissioning
Let the product acclimate itself for several
hours before commissioning, otherwise
water may condense in the housing.
Make sure that all electrical connections are
either used or covered. Commission the
product only if it is installed completely.
During cleaning
Cover all openings with the appropriate
protective equipment in order to prevent
detergents from penetrating the system.
Never use solvents or aggressive detergents.
Only clean the product using a slightly damp,
lint-free cloth. Only use water to do this and,
if necessary, a mild detergent.
IMmtcp | 3 609 929 B65/2008-09
Disposal
Dispose of the product in accordance with
the currently applicable national regulations
in your country.
3

Delivery contents

The delivery contents include:
• 1 IMmtcp interface module
• 1 instruction manual for the IMmtcp
interface module
4

Product description

Performance description
A tightening system is controlled by this
interface. It enables fast data transfer based
on Modbus TCP/IP technology.
The IMmtcp interface module is directly
supplied with power via the components in
the System 350.