Warranty Conditions; Disposal - Sagola XTech 100 Manual De Instrucciones

Ocultar thumbs Ver también para XTech 100:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
ANOMALIES
Trigger sticks or does not move
smoothly

13. Warranty Conditions

This device has been manufactured with great precision and has been subjected to a large number
of controls before leaving the factory.
The WARRANTY is valid for three years, counted as of the date of purchase, which will be indicated
by the seller in the place provided for this purpose, together with his stamp.
This WARRANTY covers any manufacturing defect, which will be repaired without charge. However,
any malfunction resulting from the incorrect use of the unit, such as inadequate connections, breaka-
ge due to dropping, or similar, the normal wear of components and in general any deficiency not
attributable to the manufacturer of the device, are expressly excluded. Likewise, the WARRANTY
shall be rendered null and void when it is evident that the unit has been handled by persons other
than our Technical Assistance Service.
This WARRANTY does not support any undertaking made by anyone outside our Technical Service.
In the case of any breakdown during the guarantee period, please attach the completed warranty
certificate to the unit and deliver this to the nearest Technical Assistance Service or get in touch with
the factory.
Any demand of greater importance against the supplier, in particular compensation for damages, is
excluded. This is also applicable to any damages that might arise during counselling, while acquiring
practice and during demonstration.
Consequently, the services rendered under guarantee do not involve an extension of the warranty
period.
Any device for which there is no duly completed guarantee certificate in the files of SAGOLA S.A.U. will
be rejected.
The manufacturer reserves the right to make technical modifications.

14. Disposal

For complete and correct disposal of the pistol, when it has reached the end of its useful
life, it must be completely dismantled so it can be recycled, separating the metal compo-
nents, the plastics.
CAUSES
Needs lubrication
Paint leaked past packing screw
ENGLISH
REMEDY
See Lubrication
Section
Thoroughly clean airbrush
(including trigger) and
tighten packing screw by
inserting small slotted
screwdriver into airbrush
body until it contacts
packing screw or change
teflon gasket.
Tabla de contenido
loading

Este manual también es adecuado para:

Xtech 200Xtech 300Xtech 400Xtech 500

Tabla de contenido