Observations; Warranty Conditions - Sagola XTREME 4100 Manual De Instrucciones

34/35
The gun has been designed for use at ambient temperature. Its maximum service temperature is
50°C. Although the air temperature of the compressed air or product is higher, this must not
exceed the maximum average temperature in the body of the gun. If the temperature exceeds
o
43 C, it is necessary to use personal protective equipment, such as gloves to thermally insulate
your hands from the unit.
The use of solvents and/or detergents that contain halogenated hydrocarbons (trichloroe-
thane, methyl chloride, etc.), may cause chemical reactions in the unit as well as in its
zinc-coated components (trichloroethane mixed with small amounts of water produces
hydrochloric acid). For this reason, these components may rust and in extreme cases the
chemical reaction caused may be explosive. We recommend you to use products that do not
contain the aforementioned components. Do not use acids, soda (alkalis or pickling
substances, etc.) for cleaning under any circumstances.
In general, precautions must be taken whenever the gun is handled, in order to prevent any
damage to this. Connectors must be securely tightened and in good condition. If pneumatic
connectors are fitted, they must comply with the standard ISO 4414.
Safety standards must be understood and applied.
Any non-compliance with the indications set out in this manual may lead to incidents affecting the
physical integrity of the user or other personnel or animals.
Respect and comply with indications relating to the conservation of the environment.
Always keep the safety sheets for the products to apply and the cleaning liquids to hand in case you
need to consult them.

16. Observations

By following the instructions set out in this manual you will ensure good spraying and quality of
finish. Should you have any doubt, please contact the Technical Service of SAGOLA.

17. Warranty Conditions

This device has been manufactured with great precision and has been subjected to a large number
of controls before leaving the factory.
- The WARRANTY is valid for three years, counted as of the date of purchase, which will be
indicated by the seller in the place provided for this purpose, together with his stamp. Once the unit
has been received, please complete the warranty and send this to the manufacturer for validation.
- This WARRANTY covers any manufacturing defect, which will be repaired without charge.
However, any malfunction resulting from the incorrect use of the unit, such as inadequate connec-
tions, breakage due to dropping, or similar, the normal wear of components and in general any
deficiency not attributable to the manufacturer of the device, are expressly excluded. Likewise, the
WARRANTY shall be rendered null and void when it is evident that the unit has been handled by
persons other than our Technical Assistance Service.
- This WARRANTY does not support any undertaking made by anyone outside our Technical
Service.
In the case of any breakdown during the guarantee period, please attach the completed warranty
certificate to the unit and deliver this to the nearest Technical Assistance Service or get in touch
with the factory.
Any demand of greater importance against the supplier, in particular compensation for damages,
is excluded. This is also applicable to any damages that might arise during counselling, while
acquiring practice and during demonstration.
Consequently, the services rendered under guarantee do not involve an extension of the warranty
period.
Any device for which there is no duly completed guarantee certificate in the files of SAGOLA S.A.
will be rejected.
The manufacturer reserves the right to make technical modifications.
ENGLISH