Warranty Conditions - Sagola Mini XTREME Manual De Instrucciones

32/33
USE SAGOLA ANTISTATIC HOSES TO ELIMINATE POSSIBLE ELECTRICAL DISCHARGES THAT
MIGHT CREATE THE RISK OF FIRE OR EXPLOSION.
Pay adequate attention when handling the gun in order to prevent any damage that might lead
to dangerous situations for the user or personnel standing near the unit, as a consequence of
leaks, breakages, etc.
The gun has been designed for use at ambient temperature. The maximum operating temperature
is 50ºC. Although the air temperature produced by the compressor may be greater, this must not
exceed the maximum average temperature in the gun grip.
The use of solvents and/or detergents that contain halogenated hydrocarbons (trichloroethane,
methyl chloride, etc.), may cause chemical reactions in the unit as well as in its zinc-coated
components (trichloroethane mixed with small amounts of water produces hydrochloric acid).
For this reason, these components may rust and in extreme cases the chemical reaction caused
may be explosive. We recommend you use products that do not contain the aforementioned
components. Do not use acids, soda (alkalis or pickling substances, etc.) for cleaning under
any circumstances.
In general, precautions must be taken whenever the gun is handled, in order to prevent any damage to this.
Connectors must be securely tightened and in good condition.
Safety standards must be understood and applied.
Any non-compliance with the indications set out in this manual may lead to incidents affecting
the physical integrity of the user or other personnel or animals.
Respect and comply with indications relating to the conservation of the environment.
16. Observations
By following the instructions set out in this manual you will ensure good spraying and quality of finish.
Should you have any doubts, please contact the SAGOLA Technical Service.

17. Warranty Conditions

This device has been manufactured with great precision and has been subjected to a large
number of controls before leaving the factory.
The WARRANTY is valid for three years, counted as of the date of purchase, which will be
indicated by the seller in the place provided for this purpose, together with his stamp.
Once the unit has been received, please complete the warranty and send this to the manufacturer
for validation.
This WARRANTY covers any manufacturing defect, which will be repaired without charge. However,
any malfunction resulting from the incorrect use of the unit, such as inadequate connections,
breakage due to dropping, or similar, the normal wear of components and in general any
deficiency not attributable to the manufacturer of the device, are expressly excluded. Likewise,
the WARRANTY shall be rendered null and void when it is evident that the unit has been handled
by persons other than our Technical Assistance Service.
This WARRANTY does not support any undertaking made by anyone outside our Technical Service.
ENGLISH