5. Warnings
Before putting the unit into operation, and especially after each cleaning and/or repair operation, a
check must be made that the airbrush components are securely tightened and that the air and the
air hoses are airtight (no air leaks). Faulty parts must be replaced or repaired as appropriate.
The airbrush is easy to handle thanks to its design and the simplicity of its mechanisms. No special
training is required for handling the gun. Use the gun according to the operating, maintenance and
safety instructions indicated in this manual and follow the application methods indicated to obtain
the required quality of finish.
The airbrush has been designed for long service and can be used with the majority of the products
available on the market.
Ensure that the products to be applied are chemically compatible with the
components these come into contact with (aluminium, stainless steel, polythe-
ne).
Do not use corrosive or abrasive products.
Mix the product according to the manufacturer's
instructions and filter the product before using it.
Control the application rate in order to apply the
appropriate amount of product and the viscosity.
For quick-drying lacquers, apply these in a continuos
manner. Do not leave the lacquer inside the airbrush for
long periods of time (this could dry up).
Read and apply all the information, instructions and safety measures indicated by the manufacturer
of the products to be applied (thinners, etc.) as these may provoke chemical reactions, fires and/or
explosions, or be toxic, irritant or harmful and in all cases dangerous for the health and personal
safety of the user and of other persons nearby (see chapter on Safety and Health).
Always disconnect the airline before handling.
Remove any unwanted material residue from the applicator, using a soft cloth
and solvent recommended by the material supplier.
Always wear safety glasses while operating this product and follow the material
suppliers usage instructions.
6. Functional Description of the Equipment
The range of Sagola XTech double effect airbrushes are presented as a light, compact, efficient
solution, to cover the basic needs of the professional artist. XTech range airbrushes has been develo-
ped and manufactured under the strictest quality requirements to offer a reliable product with a high
technical level, made with micro machining and high quality materials such as stainless steel and
anodized aluminum.
The range is divided in 5 different models (XTech 100, 200, 300, 400, 500), one for each type of
application.
Compressed air for spraying is connected to the air input connector under the airbrush.
ENGLISH