Test Mode; Menu Screen - NAMCO GUN SURVIVOR 2 Manual Del Operador

6-2

Test Mode

When the machine returns to the Game Mode from the Test Mode, it receives a
NOTE:
synchronization signal for approx. 30 seconds.
If the machine is set for communication play, (2 player mode), ensure that both 1
and 2 player screens are set to Test Mode before making any adjustments.
(If only one game PCB Test Mode is entered and exited, communication will not
be established).
After making all adjustments, change the screens to Game Mode by pressing the
player 1 and player 2 Test switches together. (If synchronization cannot be
established within the 30 seconds, COMMUNICATION ERROR is displayed and
both screens switch to single play mode only.
If the machine has been set for communication play, (2 player mode), any
adjustments made to CPU : ID (CLAIRE) will automatically be made to CPU ID :
2 (STEVE).
6-2-1

Menu Screen

1. Open the coin door and press the test switch. The "Menu Screen" will be
displayed on the monitor screen.
2. Operating the Select UP / DOWN switch will step through the tests. The colour of
the selected test will change colour.
3. Activat the test by pressing the Enter switch. Selet "EXIT" in each test to return to
the "Menu Screen".
4. After testing is completed, press the test switch to return to normal game mode.
MENU
COIN OPTIONS
GAME OPTIONS
I / O TEST
MONITOR TEST
SOUND TEST
ADS DATA
OTHERS
SELECT SE : CHOOSE
(see 6-2-3 page 43)
ENTER SW : ENTER
Page 41
Used for Price of Play settings
Used to set Game Options
Used to test Switches and Gun Recoil
Used to Test and Adjust the Monitor
Used to Test and Adjust the Sound Volume
Used to view Book-Keeping
Used to Test Game PCB