Others - NAMCO GUN SURVIVOR 2 Manual Del Operador

6-2-8

Others

1. Select "OTHERS" on the m,enu scren to check the software version, set the on
screen instruction language and reset all adjustments to factory default. The
following screen is displayed.
ROM Ver.
CLOCK
S/N
LANGUAGE
PAUSE
NAOMI TEST MODE
BACKUP MEMORY INITIALIZE
EXIT
SELECT SW : CHOOSE
2. Use the Up/Down Select switch to choose the required item, then press the Enter
button.
3. Select "EXIT" and press the Enter button to return to the Game Options Menu
Screen.
(a) Displays the current software version.
(b) Displays the PCB internal clock settings. (not used on this game)
(c) Displays the PCB serial number.
(e) Allows the display to be paused. When set to ON the display will pause each time
the Select switch is pressed IP. Resume normal display by pressing the Select
switch UP again. (No sound will be produced while the screen is paused)
(f) For testing the Game PCB. (This function is only for factory testing)
(g) When selected, the Data Initialization Menu appears. To reset all the game
settings to factory default and clear all stored data select YES from the Data
Initialization menu and press the Enter button.
NOTE: The game will not function correctly unless the software version is the
same for both game PCBs.
OTHERS
2001/06/01 WED 12:34:56
- - - -/ - - / - - - - - - -: - -: - -
123456 - 123456
ENG
OFF
ENTER SW : ENTER
Page 53
(a)
(b)
(c)
(d)
(e)
(f)
(g)