Replacing The Yaw Potentiometer - NAMCO GUN SURVIVOR 2 Manual Del Operador

7-4-3

Replacing the Yaw Potentiometer

1. Remove the Gun Assy.
2. Remove 1off pozi flange screw (M4x6) and remove the Potentiometer Bracket,
complete with the Potentiometer, taking care not to lose the adaptor.
Adapter
3. Replace the Potentiometer.
4. Replace the Potentiometer.
pitch Potentiometer
Black
Blue
Ensure that the correct colour wire is fitted to the correct terminal, and that the
Grub screw engages on the flat of the Potentiometer shaft.
8. Reassemble in reverse order.
(see 7-2 page 57)
Potentiometer Bracket
Gun Assy
bottom surface
Flat on
Potentiometer Shaft
Red
Grub screw
Page 69
Yaw
Potentiometer
Pozi flange screw (M4x6)