Replacing The Trigger Switch - NAMCO GUN SURVIVOR 2 Manual Del Operador

7-3-3

Replacing the Trigger switch

1. Separate the Gun.
2. Disconnect the Fast-On terminals.
3. Remove the Trigger Switch by pulling it off the Locating Posts.
4. Reassemble in reverse order.
Note: When refitting the Trigger Switch ensure that the correct colour wire is
reconnected to the correct terminal.
(see 7-3-1 page 61)
Trigger switch
Switch connections
Trigger switch
Page 62
Fast-on terminals
(Grey)
(Brown)