Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OPERATING
THE DRYER
O
CLEAN
THE LINT FILTER
If the lint filter
has not already
been cleaned,
lift out the filter
and
remove
the lint from
the last load.
This will
help ensure
the
fastest
and
most ef_icient
drying
performance.
Filter
0
LOAD THE DRYER
Load the dryer with the wet laundry
from the washen If the
load is extra large, you may need to divide
it into smaller
loads for proper performance
and fabric care.
POWER
_hKenmore Connect
O
URN ON THE DRYER
Press the POWER button to turn ON the dryer. The cycle LEDs
will illuminate
and a chime will sound.
O
SELECT A CYCLE
Press the CYCLE buttons repeatedly
to scroll through the cycle
selections until the desired cycle is selected. The standard
presets for the selected cycle will be shown in the display. On
MANUAL
DRY cycles, these settings can be adjusted using the
cycle setting buttons anytime
before starting the cycle.
NOTE: Not all options or modifiers
are available
on all
cycles. Refer to the cycle guide page for default
settings and
allowable
options. A different
chime will sound and the LED
will not illuminate
if the selection is not allowed.
@
WRINKLE
GUARD
START I PAUSE
O
O
BEGIN
CYCLE
Press the START/PAUSE
button
to begin
the cycle. The cycle
can be paused
at any time
by opening
the door
or by pressing
the START/PAUSE
button.
If the cycle is not restarted
within
four
minutes
of being
paused,
the dryer
will
shut off and the settings
will
be lost.
END OF CYCLE
When the cycle is finished, the chime will sound. Immediately
remove your clothing
from the dryer to reduce wrinkling.
If
WRINKLE
GUARD is selected, the dryer will tumble briefly
every few minutes to help prevent wrinkles from setting in the
clothes.
22
Tabla de contenido
