Tabla de contenido
Idiomas disponibles
Idiomas disponibles
REVERSING THE DOOR SWING
A WARNING:
THE DRYER DOOR iS VERY LARGE AND HEAVY. Failure to follow the instructions
below can result in damage
to
the dryer, property
damage
or personal
injury.
! o n
_::
/
f
l
Open the door and remove the two plastic hole
caps on the catch side by gently prying
up with a
fiat blade screwdriver.
Save these for step 6.
CAUTION:
Be sure to support the weight of the
door before removing the hinge screws.
I
Hinge Screw
O
While
supporting
the door, remove the four
screws, two from each hinge. Set the door aside
face down on a protected
surface to prevent
damage
to the door or the work surface.
O
Remove the four
the
to the
screws
securing
hinges
door frame. Remove the two plastic cover cops on
the side opposite the hinges. Reinstall the hinges
and cover cops on the opposite
sides from which
they were removed.
fmm_
fmm_
i_°
°4
• , m m ,J
_, m m ,J
O
With
hinges
cover caps
new
the
and
in the
locations, remount the inner door frame onto the
outer door frame with the screws removed in step
3.
--7
O
Reinstall the door with the screws from step 2, and
snap the hole caps into the open hinge mounting holes.
O
With
on a protected
surface, remove
the door
the
12 screws on each side of the door and lift off the
inner door frame using a fiat blade screwdriver.
Remove the latch hook and blank and move them
to the opposite side.
Test the swing of the door to make sure the hinges
and latch are properly
aligned
and that the door
closes and latches correctly.
18
Tabla de contenido
