HOW TO USE
OPERATING THE DRYER
CLEAN THE LINT FILTER
1
If the lint fi lter has not already been cleaned, lift out the fi lter
and remove the lint from the last load. This will help ensure the
fastest and most effi cient drying performance.
LOAD THE DRYER
2
Load the dryer with the wet laundry from the washer. If the load
is extra large, you may need to divide it into smaller loads for
proper performance and fabric care.
TURN ON THE DRYER
3
Press the POWER button to turn ON the dryer. The cycle LEDs
will illuminate and a chime will sound.
SELECT A CYCLE
4
Turn the cycle selector knob in either direction until the LED for
the desired cycle is illuminated. The preset temperature, dry
level, and option settings for that cycle will display.
SELECT CYCLE MODIFIERS
5
Default settings for the selected cycle can now be changed, if
desired, using the Temp and Dry Level buttons.
NOTE: Not all options or modifi ers are available on all cycles.
Temperature can only be adjusted on Timed Dry cycles; Dry
Level is only available on Auto Dry cycles. A diff erent chime
will sound and the LED will not illuminate if the selection is not
allowed.
SELECT CYCLE OPTIONS
6
Cycle options can be added using the option buttons (Accela
Steam, Damp Dry Signal, Static Shield, Rack Dry, Energy Saver,
and Wrinkle Guard).
NOTE: Not all options or modifi ers are available on all cycles.
A diff erent chime will sound and the LED will not come on if the
selection is not allowed.
BEGIN CYCLE
7
Press the START/PAUSE button to begin the cycle. The cycle can
be paused at any time by opening the door or by pressing the
START/PAUSE button. If the cycle is not restarted within 60 minutes
of being paused, the dryer will shut off and the settings will be lost.
END OF CYCLE
8
When the cycle is fi nished, the chime will sound. Immediately
remove your clothing from the dryer to reduce wrinkling. If
WRINKLE GUARD is selected, the dryer will tumble briefl y every
few minutes to help prevent wrinkles from setting in the clothes.
22