Intended Use - DeWalt XR DCMW564 Traducido De Las Instrucciones Originales

EnGLIsH
Wear eye protection.
Beware of sharp blades. Blades continue to rotate after
the motor is switched off. Remove disabling device
before maintenance or if cord is damaged.
Beware of flying objects. Keep bystanders away from
the cutting area.
Directive 2000/14/EC guaranteed sound power.
96
Do not expose to rain.
The blades will continue to rotate after the
machine is switched off.
Date Code Position (Fig. G)
The date code 35 , which also includes the year of manufacture,
is printed into the housing.
Example:
2018 XX-XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
ON-OFF Switch box
1
ON-OFF button
2
Safety key
3
Handle
4
Bail handle
5
Handle locks
6
Handle brackets
7
Handle storage detent holes
8
Battery port cover
9
Cut height adjust lever
10
Rear door cover
11
Grass collection bag
12
Grass collection bag handle
13
Upper carrying handle
14
Lower carrying handle
15

Intended Use

This lawn mower has been designed for professional lawn
mowing applications.
DO nOT use under wet conditions or in presence of flammable
liquids or gases.
This lawn mower is a professional lawn care appliance.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
38
ASSEMBLY

DANGER: To reduce the risk of serious personal
injury, turn unit off, remove safety key, and remove
battery packs before assembly, making any
adjustments or removing/installing attachments or
accessories. An accidental start-up can cause injury.
Adjusting Handle Height (Fig. D, E)
The mower is shipped in storage mode. You will need to adjust
the handle to operating position before continuing.
1. To unlock the handle 4 from storage position, pull and
twist a half turn the two handle locks
sides of the handle as shown in Fig. D.
2. Raise the handle to operating position.
3. Locate the two handle detent holes
handle brackets as shown in Fig. E.
7
4. Adjust the handle to the position that best fits the
operator and lock the handle in place by untwisting the
handle locks 6 allowing them to snap into the desired
detent holes.
Grass Collection Bag (Fig. F, G)

DANGER: Remove safety key and battery packs before
removing mulching insert, and when opening rear door
cover and installing bag.
1. Ensure the mulching insert
mower before proceeding to step 2.
2. Lift the rear door cover
11
bag 12 onto the mower so the bag hooks
lugs 21 as shown in Fig. F. Then lower the rear door cover.
Grass Mulching Insert (Fig. A, G)

DANGER: Remove safety key and battery packs
before removing collection bag, and when installing
mulching insert.
1. Ensure the grass collection bag
before proceeding to step 2.
2. Lift the rear door cover 11
insert fully into the mower as shown in Fig. G.
22
3. Ensure the rear door cover is down before turning
mower on.
Rear Discharge

DANGER: Remove safety key and battery packs before
removing collection bag, and mulching insert.
1. To operate mower in rear discharge mode remove both the
bag and the mulching insert.
2. Be sure rear door cover is down for rear discharge.
nOTE: The rear door is shaped in such a way that the opening
(at the bottom) cannot be completely closed off.
OPERATION

DANGER: To reduce the risk of serious personal injury, turn unit off, remove safety key, and remove
battery packs before making any adjustments or
6 located on both
16 located on the
22 (Fig. G) is removed from the
and place the grass collection
18 rest on the
12 is not attached
and slide the mulching