Using The Controls - KitchenAid KUDR204KSB Guia De Uso Y Cuidado E Instrucciones De Instalacion

Using the Controls

The control panels for both double drawer models are located
in the upper drawer. To view and set the Upper and Lower
control panel, pull out the
upper drawer.
IMPORTANT:
Wait 24 hours after you turn on the refrigerator drawers
before you put food into the drawers. If you add food before
the drawers have cooled completely, your food may spoil.
NOTE: Adjusting the controls to a lower (colder) setting in
one or both drawers will not cool them any faster.
If the temperature is too warm or too cold in the drawers,
fi rst check the air vents to be sure they are not blocked
before adjusting the controls.
The preset settings should be correct for normal household
usage. The refrigerator control is set correctly when milk or
juice is as cold as you like.
The freezer control is set correctly when ice cream is fi rm.
The actual temperature may differ from the display when a
drawer is open for an extended period of time.
Turning drawers On/Off:
The fi rst time that the refrigerator is plugged
in, the control will be in Cool Off mode.
Cool On and Cool Off will be the only options
that display.
Press COOL ON to turn on the drawers.
All menus and recommended temperature settings will be
displayed.
Style 1: Refrigerator drawer models
Style 2: Refrigerator/freezer combo models
The left temperature and presets touch pads control the
temperature of the upper compartment.
The right temperature and presets touch pads control the
temperature of the lower compartment.
10
05-May-2021 10:43:59 EDT | RELEASED
Viewing Celsius temperatures:
Press the F/C touch pad to toggle between displaying the
temperature in degrees
Fahrenheit and degrees
Celsius. The corresponding
indicator will illuminate.
A. F/C touch pad
Set to recommended temperatures:
When the refrigerator is turned
On for the fi rst time, a
recommended temperature
is set by default. The controls
adjust the temperature of both
compartments independently.
To adjust set point temperatures, press "+" (plus) or "-"
(minus) until the desired temperature setting is reached.
NOTES:
The set point for the double refrigerator drawers model is
37 °F (2.7 °C). The set point range for this model is 32° F to
42 °F (0 °C to 5.5 °C) for both compartments. The set point
range for the refrigerator/freezer drawers model is 32 °F to
42 °F (0 °C to 5.5 °C) for the refrigerator drawer and -8 °F to
6 °F (-22 °C to -14.4 °C) for the freezer drawer.
Wait at least 24 hours between adjustments for the
product to acclimate.
Using Presets:
For your convenience, each drawer also has controls that are
preset to recommended storage temperatures for specific
products.
Style 1: Refrigerator drawer models
Style 2: Refrigerator/freezer combo models
Pressing any preset option will set the temperature value to
recommended temperature for each category:
Refrigerator drawers:
Produce: 39 °F (3.8 °C)
Assorted: 37 °F (2.7 °C)
Freezer drawer:
Soft Serve: 6 °F (-14.4 °C)
Assorted: 0 °F (-17.7 °C)
NOTE: Soft Serve is a temporary temperature setting that will
only last for 4 hours and returns to the previous temperature
set point when complete.
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
A
Beverage: 34 °F (1 °C)
Meat: 32 °F (0 °C)
Spirits: -2 °F (-18.8 °C)
Deep Freeze: -8 °F (-22 °C)