Removing Base Grille; Power Interruptions; Vacation Care; Moving Care - KitchenAid KUDR204KSB Guia De Uso Y Cuidado E Instrucciones De Instalacion

3. Wash stainless steel and painted metal exteriors with a
clean sponge or soft cloth and a mild detergent in warm
water. Do not use abrasive or harsh cleaners, or cleaners
containing chlorine. These can scratch or damage
materials. Dry immediately with a soft, dry cloth to absorb
any remaining water.
NOTE: To keep your stainless steel drawers looking like
new and to remove minor scuffs or marks, it is
recommended that you use the manufacturer's approved
Stainless Steel Cleaner and Polish. To order the cleaner,
refer "Accessories" section.
IMPORTANT:
This cleaner is for stainless steel parts only!
Do not allow the Stainless Steel Cleaner and Polish to come
into contact with any plastic parts such as the trim pieces,
dispenser covers or door gaskets. If unintentional contact
does occur, clean plastic part with a sponge and mild
detergent in warm water. Dry immediately with a soft, dry
cloth to absorb any remaining water.
Condenser cleaning:
Risk of fire or explosion due to puncture of refrigerant
tubing.
Follow handling instructions carefully.
Flammable refrigerant used.
1. Remove the base grille to access condenser for cleaning.
Refer "Removing Base Grille" section.
2. Clean the condenser coils regularly. They are located
behind the base grille. Coils may need to be cleaned as
often as every other month. This may help save energy.

Removing Base Grille

You must remove the base grille to access the condenser
coils for cleaning.
To remove the base grille:
1. Open the double drawer door.
A. Screws
05-May-2021 10:43:59 EDT | RELEASED
Explosion Hazard
A
In some European factories the letter "W" of the part code mentioned herein will be automatically
2. Using a Phillips screwdriver, remove the two screws.
3. Remove the base grille.
To replace the base grille:
1. Open the double drawer door.
2. Position the base grille so that both tabs align and the
base grille snaps into place. Replace two screws.
Tighten the screws.

Power Interruptions

If the power will be out for 24 hours or less, keep both
refrigerator drawers closed to help food stay cold.
If the power will be out for more than 24 hours, do one of the
following:
Place all perishable food in a food locker or cooler with dry
ice.
If neither a food locker or cooler is available, consume food
if still cold or throw away perishable food at once.

Vacation Care

If you choose to turn the refrigerator drawers off before you
leave, follow these steps:
1. Remove all from the double drawer.
2. Unplug the double drawer.
3. Clean the double drawer. Refer "Cleaning" section.
4. Tape a rubber or wood block to the top of the door to
prop it open far enough for air to get in. This stops odor
and mold from building.

Moving Care

When you are moving your double drawer to a new
home, follow these steps to prepare it for the move.
1. Remove all from the double drawer.
2. Unplug the double drawer.
3. Clean, wipe, and dry it thoroughly.
4. Take out all removable parts, wrap them well, and tape
them together so they don't shift and rattle during the
move.
5. Tape the doors shut and tape the power cord to the
double drawer.
When you get to your new home, put everything back and
refer to the "Installation Instructions" received with the double
drawer.
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
13