Kohler K-19537P Guia De Instalacion página 11

Washer
Plug Button
Optional Volume Limiting Adjustment
NOTE: The water-saving stop position on the volume control has
been calibrated to a 70% maximum flow. If the maximum flow is
undesirable to the user, follow the procedures below.
NOTICE: Close the bath drain before removing the valve
components.
Using your fingers, remove the plug button.
Using a Phillips screwdriver, remove the screw.
Using your fingers, remove the washer.
Carefully slide the volume control off of the spindle.
Note the position of the stop setting on the valve.
Remove the stopper from the spindle.
NOTE: Position the stop setting several notches away from you to
increase the maximum flow. Position the stop setting several notches
toward you to decrease the maximum flow.
Reposition the stop setting, then reinstall the stopper on the
spindle at the desired position.
Reinstall the volume control on the spindle.
Reinstall the washer, screw, and plug button into the volume
control.
Recheck the maximum water flow.
Kohler Co.
Stop Setting
Volume Control
Screw
11
Spindle
Stopper
1084859-2-C