Names Of Parts And Their Functions - Yamaha ISX-803 Manual De Instrucciones

NAMES OF PARTS AND THEIR FUNCTIONS

Top panel
1 2
a
(Power)
Press to turn on the system or enter standby mode. Time is
displayed on the front panel even when the system is in standby
mode.
y
• Press and hold on the top of the unit for more than 3 seconds to set
the system to Eco Standby mode. No information on the front panel is
displayed in this mode. This can reduce power consumption. To cancel
Eco Standby mode, press
• Even in standby mode or Eco Standby mode, the alarm function is
available.
• (U.S.A. and Canada models) When the clock is set to the factory
setting and no time has been set, the unit enters Eco Standby instead of
standby mode.
b
NFC mark
Allows easy pairing with NFC technology.
c
USB port
Connect a USB device (☞ P. 9).
d
VOLUME –/+
Adjust the volume.
e
SOURCE
Switch the source to be played.
Auto Standby
• With the Auto Standby function, the unit behaves as described below when the system is turned on (default setting):
– This unit enters standby mode when playback of CD/USB is paused, when no signal is input from the tuner or a connected device, or when playback
continues at quite a low volume for a certain period of time (about 20 minuets).
– This unit enters standby mode when no operation is performed for more than 8 hours.
• Activating/Deactivating Auto Standby
1 1 Plug in the unit while pressing and holding
2 .
2 Keep holding
Auto Standby status changes, blinking the following indicators:
– When activating Auto Standby:
– When deactivating Auto Standby: Only
y
(U.S.A. and Canada models) When the clock is set to the factory setting and no time has been set, this operation is not available. Set the time before the
operation (☞ P. 5).
2
En
USB
VOLUME SOURCE ALARM
3 4 5 6
again.
.
on the front display blinks for 3 seconds.
AUTO 2 SET 2 BEEP SOURCE + BEEP
1 1 SOURCE
DIMMER CLOCK ALARM TYPE
LABEL SIDE
SNOOZE SLEEP PRESET
7 8 9
f
ALARM
Turns the alarm on/off, and allows various alarm settings to be
adjusted (☞ P. 16, 17).
g
SNOOZE/SLEEP
Set the sleep timer or switch the alarm to snooze mode
(☞ P. 17, 19).
h
PRESET
Store/call up radio stations, or switch the playback folder
(when playing music on data CDs or USB devices).
i
/
Skip the playback track/file, or tune the radio.
Holding the button down while playing a track/file will search
backward/forward the track/file.
j
/
Play/pause the track being played.
k
Eject the CD (☞ P. 7, 8).
l
Disc slot
Insert a CD (☞ P. 7, 8).
and the , ALARM, and PRESET buttons on the top panel blink for 3 seconds.
j k l