PLAYER SECTION
iPod (Digital connection)
• Compatible iPod models
..................................... iPod touch (1st, 2nd, 3rd and 4th generations)
iPod nano (2nd, 3rd, 4th, 5th and 6th generations)
• Compatible iPhone models
......................... iPhone 4S, iPhone 4, iPhone 3GS, iPhone 3G, iPhone
• Compatible iPad models .............. iPad (3rd generation), iPad 2, iPad
An iPod may not be detected by the unit or some features may not be
compatible, depending on the model or software version of the iPod.
CD
• Media............................................................................ CD, CD-R/RW
• Audio format ..................................................Audio CD, MP3, WMA
USB
• Audio format .................................................................... MP3, WMA
AUX
• Input connector............................ 3.5 mm (1/8 in) STEREO mini jack
AMPLIFIER SECTION
• Maximum output power ..........15 W + 15 W (6 Ω 1 kHz, 10 % THD)
• Headphones
..............3.5 mm (1/8 in) STEREO mini jack (Impedance 16 to 32 Ω)
• Equalizer characteristics
EQ Low (Bass)/EQ Mid (Middle)/EQ High (Treble) ..............±10 dB
iPod, iPhone, iPad
"Made for iPod", "Made for iPhone" and "Made for iPad" mean that an
electronic accessory has been designed to connect specifically to iPod,
iPhone or iPad, respectively, and has been certified by the developer to
meet Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards. Please note that the
use of this accessory with iPod, iPhone or iPad may affect wireless
performance.
iPad, iPhone, iPod, iPod nano, iPod touch and iTunes are trademarks of
Apple Inc., registered in the U.S. and other countries.
SPECIFICATIONS
TUNER SECTION
[As of July, 2012]
Tuning range
• FM ......................................................................87.50 to 108.00 MHz
• AM (U.S.A. model only) ....................................530 kHz to 1710 kHz
SPEAKER SECTION
• Type ................................................................... Full range bass reflex
• Driver.......................................................11 cm (4-1/2") cone type ×1
• Frequency response .................................... 50 Hz to 20 kHz (–10 dB)
• Dimensions (W × H × D)
...........................................129 (5-1/8") × 126(5") × 251 (9-7/8") mm
• Weight..........................................................................1.7 kg (3.7 lbs.)
GENERAL
• Power supply
U.S.A. model .......................................................... AC 120 V, 60 Hz
Asia model .............................................. AC 220 to 240 V, 50/60 Hz
Taiwan model .............................................. AC 110 to 120 V, 60 Hz
• Power consumption ..................................................................... 30 W
• System off consumption
.................................. 3.0 W or less (NORMAL)/0.5 W or less (ECO)
• Dimensions (W × H × D)
........................................180 (7-1/8") × 127 (5") × 273 (10-3/4") mm
• Weight..........................................................................2.7 kg (6.0 lbs.)
Specifications are subject to change without notice.
Responsible Party:
Address:
Telephone:
Type of Equipment:
Model Name:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including
interference that may cause undesired operation.
See user manual instructions if interference to radio reception is
suspected.
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Yamaha Corporation of America A/V Division
6600 Orangethorpe Avenue, Buena Park,
CA 90620, USA
1-714-522-9011
Micro Component System
MCR-042
non magnetic shielding type
23
En