Disc Playback - Yamaha MCR-042 Manual De Instrucciones

TROUBLESHOOTING
iPod
Problem
No sound.
The iPod does not charge up.
The front panel display indicates
"iPod Unknown" when you
connect the iPod.

Disc playback

Problem
Disc cannot be inserted.
Some button operations do not
work.
Playback does not start
immediately after pressing
(stops immediately).
The front panel display indicates
"no operation", and a disc cannot
be inserted or unloaded.
When you insert a disk, the front
panel display indicates "CD No
Disc" or "CD Unknown."
20
En
Cause
The iPod is not set in the iPod dock firmly.
The headphones of the iPod are connected.
The iPod software version has not been updated.
The iPod is not set in the iPod dock firmly.
USB is selected as the audio source.
The iPod being used is not supported by the unit. Use a supported iPod (☞ P. 23).
Cause
Another disc is already inserted.
You are attempting to insert a disc that cannot be
used by this unit.
The disc loaded into the unit may not be
compatible.
The disc may be dirty.
The disc loaded into the unit may not be
compatible.
If the unit was moved from a cold to warm place,
condensation may have formed on the disc
reading lens.
The option menu is displayed. Alternatively, the
alarm is playing.
The disc loaded into the unit may not be
compatible.
The disc may be dirty.
The disc does not contain playable files.
The disc was inserted upside down.
Solution
Remove the iPod from the unit, and then set it in the iPod
dock again (☞ P. 3).
Remove the Headphones.
Download the latest iTunes software to update the iPod
software version to the latest.
Remove the iPod from the unit, and then set it in the iPod
dock again (☞ P. 3).
Select something other than USB as the audio source.
Solution
Unload the disc with .
Use a disc supported by the unit (☞ P. 22).
Use a disc supported by the unit (☞ P. 22).
Wipe the disc clean (☞ P. 22).
Use a disc supported by the unit (☞ P. 22).
Wait for an hour or two until the unit adjusts to the room
temperature, and try again.
Press OPTION to exit the option menu. Alternatively,
press ALARM to stop the alarm.
Use a disc supported by the unit (☞ P. 22).
Wipe the disc clean (☞ P. 22).
Use a disc contains playable files (☞ P. 22).
Insert the disc with the label facing upward.