Bauhaus Tossi 8 Instrucciones Para La Instalación, Uso Y Mantenimiento página 109

*******************************************************
It means fire put out automatically during the
operation, when the exhaust gas temperature
is below 40-45degree.
Such as: 1.There has no fuel at hopper.
2. Auger motor is broken and stop feeding the
fuel.
It means there is earthquake during the
operation time. or You tilt the stove. Only
for the Japan version
It means that there are some problems with
vacuum Switch.
Such as door has not been closed properly;
Combustion fan's speed cannot Speed up;
There is some leakage about the stove or
exhaust pipe is blocked and so on.
During the operation,
interrupted by electronic cut.
If check everything is fine, you can press
the stove is
!! ATTENTION !!
23
It means Igniter failure at the beginning.
Such as: 1. there have clinkers in fire pot.
2. The fire pot has not put right.
3. The switch which is located beside the
combustion fan to test the exhaust gas
temperature sensor, is broken,
4. The igniter is broken
Problem for the temperature sensor.
Unplug or broken or water temperature is too
high (This function only for the pellet stove with
hot water)
It means that the high temperature sensor ，
which is located below the hopper, has some
problem, Such as: 1. the switch is broken,
2. The temperature is too high that the stove
runs not properly
It means you need to cleaning the stoves.
to delete the Error code