Thermor AEROMAX SPLIT 2 Manual De Instalación página 18

Warnings
2.2. Suspended device 200 l
• Cut out the template printed on the box and use it for labelling.
Drill and plug the water heater and use attachments of
at least 10 mm in diameter (Ø) suitable for your wall type
(drywall, concrete, brick).
Using a rack is compulsory if the wall is not capable of bearing the filled boiler's weight. In
this case, it is mandatory to fix the water heater to the wall, either with the upper bracket
or with the fixing bracket (which allows it to be integrated into a cupboard with internal
dimensions of 600 x 600 mm).
First put the water hea-
ter on its rack to mark the
mounting points.
Drill the holes.
Put the water heater back
into its position.
Affix the upper bracket.
16
Presentation Installation
Laying
template
rit de pos e
age)
on