Installation Settings - Thermor AEROMAX SPLIT 2 Manual De Instalación

Warnings
8. Installation settings and access to emergency
mode
(Unless these have been made at first start-up)
To access the various system settings again,
in INSTALLER MODE
 Press MENU simultaneously
and the up arrow for 5 seconds.
 And then
Menu architecture
• Lock
By activating the lock, the user no longer has access to operating modes, heating range
settings or connectivity.
• Heating times
This setting defines the permissible range for starting the heat pump and the electric
heating element in accordance with the hot water requirements.
Operating Range
H.P. 24 h/ELEC 24 h
H.P. 24h/ELEC OP
26
Presentation
.
Settings

:
Lock
Hot Water
Resetting
Installation conditions
(see diagram on the cover)
• Wiring as shown in figure
1
• Wiring as shown in figure
2
• Power supply contract
with off-peak hours option.
Heating times
Anti-Legionella
Advanced modes
At any time of the day, if hot wa-
ter is needed.
Heat pump and electric heating
element in continuous operation
only during off peak hours.
Installation
Emergency mode
Electric backup
Switching on heat pump and
electric heating element