Pulsar FORWARD F455 Manual Del Usuario página 10

SumLight™ function
• SumLight™ function allows a significant increase in the sensitivity level
of the CMOS array in the event of a reduction in the light level, making it
possible to observe in conditions of poor light without the use of an IR
illuminator.
• A short press of the LEFT button (8) switches on the SumLight™ function.
• Press the LEFT button (8) once more to switch off.
• The SumLight™ icon (on
Attention! When the SumLight™ function is activated, the noise level in the
image increases, the frame rate decreases, and the image slows down. Any
sharp movement of the attachment may cause the image to become "blurred".
Such effects are not defects. Luminous white dots (pixels) may be visible on
the attachment display. The number of dots may increase when the SumLight™
function is enabled. This is due to the peculiarities of this function and is also
not a defect.
Stream Vision App
Download the Stream Vision app to stream the image via Wi-Fi from your
Forward device to a smartphone or tablet. Detailed instructions are available
on the Internet at www.pulsar-vision.com.
Default Wi-Fi password: 12345678.
7
ENGLISH
or off ) is displayed in the status bar.